Double stick sand making machine operating procedures

PROCEDURES ON THE MACHINE DANGEROUS VOLTAGES PRESENT EVEN WHEN THE MACHINE IS TURNED OFF NOTE The place of installation is free of dust and sand Fix the cable the frame making a double to turn and using the cableclamp as shown in

SOP Manual 151 Cleaning and Disinfection 151 Introduction The cleaning and disinfection CampD of equipment materials and premises is done to prevent or mitigate the spread of foreign animal diseases FADs during an outbreak

Keep all guards in place while operating the machine While operating the milling machine allow no one else to touch it Keep hands away from moving cutting tools Do not make measurements of the stock while the milling machine is powered Do not allow large quantities of chips to accumulate around the work piece or machine table After stopping the machine use a

Keep clear of moving machine parts Follow correct clamping procedures Keep overhangs as small as possible and check workpiece is secure Set the correct speed to suit the cutter diameter the depth of cut and the material ENDING OPERATIONS AND CLEANING UP Switch off the machine when work completed Remove milling cutters and store them safely

USEPA Safety Health and Environmental Management Program Procedures and Policy Manual Science and Ecosystem Support Division Region 4 Athens GA Most Recent Version SESD Operating Procedure for Field Sampling Quality Control SESDPROC011 Most Recent Version SESD Operating Procedure for Field Equipment Cleaning and Decontamination